Cricut makes quick work of tapered course

The original tapered boiler course took about a week of fitting, filing and filling before it was acceptable. Now, the process to draw the shape may have been painful, but cutting it out with the Cricut took all of five minutes. Because the two boiler sections are actually quite accurately formed, it took very little […]

Re-drafting the taper course ends in a draw

I first noticed the crack in 622’s taper course when I was putting together the slides for my recent clinic on modern tools. Just before going to prime all the parts, I decided there was no point in seeing if it was serious enough to fix. I made the original taper course from .010″ styrene, […]

Spoiled for choice

Chris Mears made some wonderful observations in a comment and follow-up post to my post, Where to. You should go read Chris’s writing, because it is dense enough that you will almost certainly take something different from it than I do. Let me precis my primary takeaway from Chris’s post and comment: the adoption of […]

More floor space

Our family of four lives in a modest 1800 square foot (170 m2) side split house. Every room does double duty. The rest of the family calls the train room “the rec room.” The heavy shop is tucked into an alcove of the laundry room, which is also our recycling centre and pantry and provides […]

Where to?

Tonight I delivered a new clinic, “21st Century techniques to model a 19th Century locomotive” to a small audience after the local NMRA division’s annual general meeting. The intent was to attract more attendance to a business meeting with some diverting content. They would have called someone else, but I guess the entertaining people were […]

Daylight Savings hour sketching

Coinciding as it did with Hallowe’en this year, I almost didn’t get any extra modelling done for daylight savings hour. But then, I was awoken by an incident on one of the servers at work right at the moment that clocks went back, or at least most of the clocks went back. So, while waiting […]

Turnout control Mark II

Now that I almost have a functioning locomotive again, I’m eager to get back to operations. As I had to get the 3D printer out to create a new steam dome after the first got chipped after its tungsten weight propelled it at the floor, I decided to try out a plan for an improved […]

Quite a few parts

When you lay them all out, ready for painting, 622 incorporates quite a few subassemblies! Thirty-seven, in this photo, but I’ve left out the cab windows, so that’s another seven. Forty-four subassemblies in total. While I had all the subassemblies in one place, I also took a few minutes to count all the parts. 513. […]

Evicting the anchor tenants

What’s on my workbench? Absolutely nothing for the first time in months! I finally banished those items that had been harbouring the mess. The pieces for 622 have been taped to some foamcore in preparation for painting, while the left-over etches have found a new home in the drawer with other model projects. The big […]

The Mary Street bridge disaster

For years, foamcore mockup buildings have helped tell the story of Pembroke; even though they’re plain white, lay visitors can immediately understand that this is a model of a town, and begin to appreciate what I’m aiming for. I’ve used them to understand and modify massing and composition, which should help to avoid waste down […]