Staging Yard Ties

I’ve been spending most of my recent train time trying to get the turnout controls to print. The good news is that it looks like they’re going to be sufficiently robust. The bad news is the original design had a lot of overhang, and would come off the 3D printer bed at the least provocation. […]

Staging Yard Points

As you recall, the staging yard is on a wide window sill, and that means there is no room for Bullfrog or other switch machines below the roadbed. Because the room provides a number of functions in our house, we want to be able to make the staging yard look like a clean window sill, […]

Cat TV

My friend, colleague and fellow creator, Mitch, bought a LulzBot 3D printer last week. I believe I’ve agreed to buy a share of it, and now might be the time.

More Lines – Laying out the Staging Yard

Andrew came over last night and, after we’d finished installing the last Bullfrog, we plunked the staging planks on the window sill and laid out the staging yard.

North switch machine

Andrew came over last night, and together we had a productive evening, installing the switch machine for the north switch and laying out the staging yard. But that’s another blog post. FastTracks expedited a spring to finish the last Bullfrog, and so, we were away to the races. Thank-you FastTracks, I was delighted by your […]

Engine house doors

Part of my vision is that an operating session starts with the engines shut in the engine house. The first thing the crews must do is open the doors and bring their engines out; and the last thing they do when retiring is to close the doors behind them. Now, I could just make the […]

North switch guard rails

As far as I’m concerned the guard rails are largely cosmetic. However, they need to get soldered, so I do them before the detailing stage of a turnout. With Micro Engineering code 55 rail, anything bigger too (and probably code 40, but I don’t know for sure), the profile is a little wider than the […]

Design for turnout control

I decided to take a break from the trackwork this evening. The Bullfrog is going to be a two-person job, and so, I’m going to ask Andrew to help me on Wednesday. The guard rails can go on either on Monday or Tuesday evening. In the meantime, I have some visitors coming to use the […]

More thoughts on Pembroke:87.1

Will I build Pembroke:87.1? The jury’s still out. However, I’ve been having fun thinking about the project. So, here I will jot down some of my thoughts. I don’t want the display layout to distract me too much from the main layout. That means it must use minimal resources in terms of both time and […]

North switch points

The points are by far the hardest part of getting Proto:87 running. The flanges are so tiny that they like to find any excuse to go the wrong way. For this switch, I originally planed the points using the Screaming Banshee Rail Grinder almost a year ago. Miraculously, I found them in my increasingly dusty […]