Frog Jewelry

When I first laid the track for Pembroke, I left the detail off until it was running the way I wanted. That day is getting near. There are a few persistent derailments, but I’m getting better and better at fixing them. So, the southern-most two turnouts are starting to get dolled up. In my previous […]

Stupidly Fine Wire

It is better to leave a detail off than to make it too heavy or over-scale. Typical line fences, such as the one at the edge of the pasture, or the fencing for the cattle pens, are a mesh of wires no more than 1.5 mm in diameter. That’s less than .02 mm in HO […]

Extra 10 North Holds the Main

I’ve been making steady progress toward eliminating derailments on the main track. However, the passing siding has seen wheels only a couple of times in all these years because, frankly, there hasn’t been a need to use it! So, to create a reason to use the passing siding, and also to get the equipment off […]

Cattle Pen Top Rail

The Canadian Government Railways stock pen drawing on which I based the cattle chutes shows wire fences with a single rail around the top. I like the lightness of the wire fences because they don’t detract from the herd behind. However, I’m concerned that an enclosure that small would require a rail the cattle can […]

Oktobahnfest 2024

This week, the North Shore model railroaders came by to check on progress at Pembroke. Our organizer, Graham, holds an annual gathering of the North Shore in December that he calls Trains and Scones. So, my Darling Wife and I decided we needed a theme for our own, which was in October for the second […]

Water tower mechanism in action

My goal when designing the controls for Pembroke has been to simulate the actions of real railroaders, but smaller and lighter. Real railroading is heavy, dangerous work, after all! When it comes to the Pembroke water tower, this means there is, of course, no button. Almost nothing had a button in 1905, except for the […]

Water Tower Electronics Installed

With the last gremlin exorcised from the electronics project board, I’ve turned the workbench back to physical mode. During testing, I found that the limit switch was not in fact making contact with the linear actuator. I considered hacking it, but it was easier to tweak the design of the bracket and print a fresh […]

Tender Truck Proof of Concept

The first print was too tight, and the second print was too loose. The third print was just right! So after playing with the action for a few days and showing it to my friends, I soldered some .010″ phosphor-bronze wire to some custom-made brass tube bearings, and assembled the truck. Honestly, it could roll […]

Ontario Meadows and Fields

The land around Pembroke was settled about sixty years prior to 1905, and before that, it would have been forest. So a cleared area would not have been allowed to go fallow unless it were unproductive. Meadows are a recent addition to the Ontario landscape. Having said that, there is space in front of the […]

The Changing Landscape of Ontario

The Girl and I are travelling around Ontario this week, looking at universities. On the long drive from Ottawa to Fake London, there was ample time to ponder how the landscape has changed, even over my lifetime, and the implications to modelling Pembroke in 1905. The most alarming change has occurred in the past ten […]