Evicting the anchor tenants

What’s on my workbench? Absolutely nothing for the first time in months! I finally banished those items that had been harbouring the mess. The pieces for 622 have been taped to some foamcore in preparation for painting, while the left-over etches have found a new home in the drawer with other model projects. The big […]

The Mary Street bridge disaster

For years, foamcore mockup buildings have helped tell the story of Pembroke; even though they’re plain white, lay visitors can immediately understand that this is a model of a town, and begin to appreciate what I’m aiming for. I’ve used them to understand and modify massing and composition, which should help to avoid waste down […]

A tiny switch boosts enjoyment

#622 and I have been working bugs out of the layout. After correcting a gauge issue with one of the engine truck axles, all the faults have been with the layout, and have been easily identified with a track gauge — a track gauge that Ed McCamey had EDM-cut from highly-conductive 18-gauge steel because he […]

Minding the gaps

The common wisdom says that you should put something insulating into the electrical gaps between rails. According to model railroad folklore, without insulators, those gaps will eventually close up with all the humidity and heat-induced rail cavorting, and the resulting short will be remarkably difficult to find. Now, Pembroke’s Presbyterian rails have never been inclined […]

The Pembroke Milling Company spur

The Pembroke Milling Company was situated at the other end of the Pembroke Street bridge. Indeed, the mill was the reason for the dam that meets our side of the Muskrat behind the depot. One of the Pembroke Southern’s founders, William Moffat owned the mill, and he preferentially built a warehouse on his railway. It […]

622 makes it to sea trials

622 is finally back together again. I managed to keep the same electrical scheme albeit with a little less elegance than originally planned. Where svelte insulating layers were incorporated into the frame, I now have beefy sandwiches of nickel silver and epoxy on plastic. Where the frame originally conducted electricity covertly, there are now obvious […]

Chasing a short

It wouldn’t be one of my builds without some sort of disaster at the end. On #10, I dropped the boiler on the way to the paint booth, breaking the smokebox off completely. For 622 the disaster is a short that has developed in the frame since the last time I tested the locomotive. At […]

Anchor Tenants

There seems to be a social-media contest for messiest workbench. Many modellers get chest-puffing macho affirmation by claiming that they can still produce amazing work even when the bottles of paint and boxes of partially finished kits are threatening to obliterate the remaining 6 square inches of usable work surface in a cataclysmic avalanche. I […]

Tender side sill details

As I mentioned, the tender side sills were looking a little barren. So, I scurried over to the reference material to see what should be there. Interestingly, this is a point where 622 differs from its stable-mates. The details were straightforward to put together with strips of brass and some Grandt Line nut-bolt-washer castings. Now […]

622 Final engine details and a discovery

Despite the glorious summer, I’m still getting a few minutes of modelling time in most days. A few minutes adds up and soon there have been hours, and now I’ve finished the engine part of 622. There is still a short list of details to add to the tender, but an hour’s work should see […]